Digital product passport for furniture: what is decided and what is still open

For furniture, the Digital Product Passport is voluntary today. According to its working plan, the European Commission plans the legal act for furniture in 2028. That act sets which details the passport must contain. This guide separates what is decided, what a first draft proposes and what furniture manufacturers, importers and retailers can prepare now.

Summary

  • Furniture is among the first product groups the Commission wants to regulate under the Ecodesign for Sustainable Products Regulation (ESPR). The working plan names 2028. There is no legal act and no draft act yet.
  • The act generally applies 18 months after it enters into force (Art. 4(4) ESPR).
  • A first draft of the passport content (October 16, 2026) is not binding, and many fields are still open.
  • The EU Deforestation Regulation covers wooden furniture from December 30, 2026. It does not require a product passport.
  • Mattresses are a separate product group, listed for the year after furniture.

What is decided for furniture

The Commission’s Ecodesign working plan 2025 to 2030 of April 16, 2025 names 2028 for furniture. The plan is a communication and not legally binding. It gives years, not exact dates. There is no legal act for furniture and no draft. On the “Have your say” portal, where the Commission puts drafts up for feedback, there was no initiative on furniture on November 4, 2026.

The Commission adopts the act. Council and Parliament then have two months to object, four on request (Art. 72(6) ESPR). After that it is published and enters into force. It generally applies 18 months later, earlier only in justified exceptional cases (Art. 4(4) ESPR). If the act is adopted in 2028, the obligation can apply 18 months after it enters into force at the earliest.

Until then you may offer a passport voluntarily. As long as there is no act for furniture, you may not say it meets EU requirements or fulfills an obligation (§ 5 UWG, German law). For the structure of the ESPR see the ESPR and the Digital Product Passport. For the basics see What is a Digital Product Passport? (in German).

What the first draft proposes

Since April 16, 2026, a 15-month preparatory study on furniture has been running for the Commission’s Directorate-General for Environment, carried out by VITO, Fraunhofer IZM, Trinomics, the Öko-Institut and Ecoinnovazione. On October 16, 2026, the study team published the second version of its report on the content of the passport. The authors say themselves that the results are preliminary and not yet requirements. The ratings below are their proposal, which they are still discussing with the industry.

Data pointRating in the draft
Model identifier and batch identifierMandatory
Manufacturer with postal and email addressMandatory
Name and concentration of substances of concernMandatory
Instructions for care, assembly and repairMandatory
Spare parts with availability, identifier and sourceMandatory
Take-back and disposalMandatory
Upholstery fabricsMandatory where textile labeling applies
Recycled content in percentProposed as mandatory
Information on disassembly, reuse and recyclingProposed as mandatory
Durability, repairability, recyclabilityOpen
Main materials and weightOpen
Carbon footprintOpen
Identifier per itemVoluntary
Warranty period and expected lifetimeVoluntary
Condition and repair historyVoluntary

Whether the main materials of a piece of furniture must go into the passport is therefore open. The draft covers upholstery fabrics through textile labeling (in German). It does not propose a score or index for repairability.

The model is meant to be the basis. Data per batch is needed only where it changes from batch to batch, for example the recycled content or the origin of the wood. An identifier per item stays voluntary. For made-to-measure furniture the study is looking for its own solution. The report does not propose which data carrier goes on the furniture or where it sits. It names the GTIN as a common identifier in the industry. For now the study also counts outdoor and built-in furniture, bed frames and headboards as furniture.

According to the report, micro and small enterprises make up 85 percent of the industry, and the authors recommend taking their capacities into account for data exchange. Furniture manufacturers can tell the study team which data points are feasible in their business: it accepts feedback until November 25, 2026, by email to [email protected]. The next meeting with manufacturers, associations and other stakeholders is planned for March 2027 according to the project plan.

EU Deforestation Regulation for wooden furniture

From December 30, 2026, the EU Deforestation Regulation (Regulation (EU) 2023/1115) applies to wooden furniture. It covers seating made of wood or with a wooden frame, also upholstered, and other wooden furniture, in each case without used furniture (Annex I). Micro and small enterprises have until June 30, 2027 for seating. For the other wooden furniture, December 30, 2026 applies to them as well, because it was already covered by the earlier Timber Regulation (Art. 38(3)).

Whoever first places the furniture on the EU market must show where the wood comes from, that it was legally harvested and that no forest was cleared or degraded for it after 2020. Retailers who resell the furniture afterwards do not submit their own due diligence statement, since the regulation was amended. They record whom they got the furniture from, with the reference number of the due diligence statement, and when they sell to businesses also to whom. They keep this information for five years (Art. 5(3) and (4)). Retailers that are not small or medium-sized enterprises also register in the EU information system (Art. 5(2)).

The Deforestation Regulation does not require a product passport. Origin details in a passport can help as evidence, but they do not replace the due diligence statement in the EU information system. The furniture study’s draft lists the origin of the wood as a possible voluntary data point.

Furniture brands that already show a passport

Some manufacturers already show through a QR code or chip what is in their furniture. The examples come from public sources, and the brands did not take part in this guide.

  • Poltrona Frau (Italy) has given a passport to seating of its Vanity Fair and Archibald collections since June 2026, accessed through an NFC chip that comes with each piece. It shows materials, origin of raw materials, production steps and care videos. The whole catalog is to follow by 2030.
  • NaughtOne (UK) added QR codes to four pieces in December 2025. They lead to care, warranty and certificates and explain how to repair, pass on, recycle or dispose of the piece. According to the manufacturer, the biggest hurdle was suppliers who could not provide the data in sufficient quality.
  • KOINOR (Upper Franconia) showed all 127 exhibited pieces with a passport at the Milan furniture fair in April 2026. It bundles care, functions and service. The manufacturer does not say whether furniture in stores already has one.
  • Ligne Roset (France) has given each Togo sofa its own identifier since March 2025, as a QR code on the sewn-in brand label. It proves authenticity and lets ownership be transferred on resale. It does not show material or care.
  • Fritz Hansen (Denmark) placed a chip under the upholstery of chairs in a 2023 pilot for the Danish Crown headquarters. Scanning it shows the materials, including traceable leather.
  • Auping (Netherlands) shows on its Evolve mattress, through a label on the side, what it is made of, where the raw materials come from and how it is recycled.

The code sits either on the furniture itself, on the label or under the upholstery, or it comes with the documents. The act may set where the data carrier has to sit. For QR code size see Designing a QR code for the Digital Product Passport (in German), for more examples Digital Product Passport on the product (in German).

What you can prepare now

Much of what the draft proposes already exists in furniture companies, often on paper or spread over several systems. These steps help whichever software you use later.

  • Clarify your role. If you make furniture under your own brand, you will create the passport yourself later. If you sell other brands’ furniture, the manufacturer has to give you the data carrier free of charge once the obligation applies, and you show the passport in your store. You create your own passport only if you import the goods into the EU yourself.
  • Define an identifier per model. The draft takes the model as its basis. If each model has a GTIN, the passport address can be built from it later. Where to get GTINs is explained in GTIN for the Digital Product Passport (in German).
  • Store instructions digitally. According to the draft, care, assembly and repair instructions and the spare parts list belong in the passport. Put them under a permanent web address that does not change when you switch stores.
  • Ask your suppliers. Substances of concern with their concentration, the recycled content and, for wood, the origin come from your suppliers. Ask with your next order.
  • Plan space for the code. Think about where a QR code label can stay without getting in the way, for example under the seat, on the back or in a drawer.

Furniture passports with Mapasso

Mapasso is software for online stores and ERPs, available as a Shopify app and as a portal in the browser. For furniture, Mapasso has a template with the fields expected lifetime, disassembly instructions and recycling notes. The final mandatory fields will be set by the EU act. The data comes from Shopify, from WooCommerce or Shopware 6, or from a CSV or Excel file in the portal. Suppliers can send details and proof through a link without an account, and you accept each item individually. The pass page is labeled in ten languages. See the Shopify app and the pricing page. If you are weighing providers, the checklist in How to choose Digital Product Passport software lists what to compare.

Frequently asked questions

When do furniture products need a Digital Product Passport?

According to its working plan, the Commission plans the act for furniture in 2028. It generally applies 18 months after it enters into force at the earliest. A fixed date exists only once the act is adopted.

Does a furniture retailer need its own passport?

Once the obligation applies and you sell other brands’ furniture, the manufacturer supplies the data carrier and you show the passport in your store. If you sell under your own brand, you create the passport yourself. If you import furniture into the EU yourself, you have to make sure a passport exists.

What has to go into a furniture passport?

The act sets that. The draft of the preparatory study proposes, among other things, model identifier, manufacturer, substances of concern, instructions, spare parts and take-back as mandatory data points.

Sources (14)

Sources as on the German page, checked on the date given there. German version of this guide: Digitaler Produktpass für Möbel (in German).

If you sell on Shopify, Mapasso for furniture brands on Shopify shows what the furniture template asks for.